In the digital era, our everyday activities have become so dependent on technical gadgets. This is why we have to face multiple issues.
Among all the devices available, the Eufy camera stands out as the top-notch surveillance system. But still, you have to encounter several issues with this device, such as – Eufy Camera Error Code 110.
Calm down!
To help you overcome this issue, we have curated this guide for you. In this comprehensive guide, you will have an eye on the common causes for error 110 on your Eufy camera.
In addition to this, we will also let you know about the key resolutions for the same. Now, your device need not suffer from further damage.
Are you fed up and tired of devices that run out of power faster than other devices? We have got you covered.
Hurry up!!
The clock has started ticking at the moment. So it’s high time to accept the task of troubleshooting the error code on your Eufy. Let’s start working on it right away and finish the process within the given timeframe!
What Is Eufy Camera Error Code 110?
Eufy Camera Error Code 110 typically refers to a network connection issue or problems with the camera’s Wi-Fi connection. When your camera shows this error, it means that the device is unable to establish or maintain a stable connection to the network, which is essential for the camera to function properly.
This issue can arise due to several reasons, such as poor signal strength, router settings, or temporary software glitches. Let’s go through some common causes and solutions.
Causes of Eufy Camera Error Code 110
By recognizing the factors given below, you can effectively fix and troubleshoot Eufy Camera Error Code 110. It will enable you to restore seamless functionality to your security system.
All you need to do is take a deep dive into the list of key factors responsible for this error in detail.
Let’s get started!
1. Weak Wi-Fi Signal
Suppose, the camera is placed too far from the router, it may experience weak signal strength. After that, it will lead to interruption in the communication. It prevents your camera from establishing a stable connection for live streaming or sending data to the Eufy Security app.
2. Network Congestion
There are several devices that are connected to the same Wi-Fi network. It can overload the bandwidth. As a result, it will reduce the available resources for the camera. Due to the poor live streaming quality, you have to encounter failure.
3. Interference from Other Devices
If the electronic devices are operating on the same frequency, they can be responsible for unwanted interruptions with the signal. Electronic devices include – microwaves, cordless phones, or Bluetooth devices. Such kinds of network disruptions cause your camera to lose connectivity or experience several lags.
4. Outdated Firmware
Are you running an outdated firmware? If yes, it can also result in several compatibility issues with the Eufy app or a few other connected systems. The presence of bugs or security vulnerabilities in older firmware may trigger several errors such as – Eufy Camera Error 110.
5. Router Issues
A corrupted or obsolete router can prevent your camera from maintaining a stable connection. This way, your camera will not be able to send or receive live streaming data in an efficient manner.
6. Temporary Server Downtime
The servers of the Eufy camera may undergo maintenance or experience high traffic. Due to such kind of temporary disruptions in live-streaming services, your device’s functionality can be impacted.
7. Incorrect Camera Placement
Are you going to place the camera in an area where thick walls or metallic barricades are present? If so, you should know that it weakens the Wi-Fi signal. When the camera has difficulty in maintaining connectivity, it results in several streaming errors.
8. Eufy App or Software Glitches
If there are bugs in the Eufy Security app? Or do you have to encounter temporary software glitches on your device? If so, it may interrupt your Eufy camera’s functionality. As an outcome, the app may fail to load the camera’s live feed or respond slowly.
9. Camera Overload or Malfunction
Prolonged use of the Eufy camera or overheating can disrupt its operations. Later on, the camera will become unresponsive or display error messages.
10. Insufficient Power Supply
Suppose, the power source is weak or inconsistent. If it is, there can be negative impacts on your camera’s functionality. Apart from that, your device may lose connection intermittently. It results in Eufy camera error code 110.
Tips to Troubleshoot Eufy Camera Error Code 110
Wanna address the Eufy Camera Error Code 110? Or do you want to restore your camera’s functionality more efficiently?
If so, it is better for you to follow the tips given below. All you need to do is follow these and resolve the issue more quickly.
Let’s have a glance at them.
1. Check Your Wi-Fi Connection
A weak Wi-Fi signal is one of the most common reasons behind connection issues. Make sure your Eufy camera is within range of your router and that there are no significant obstructions blocking the signal.
- Initially, you need to confirm that your camera is connected to a strong and stable Wi-Fi network.
- Now, place your camera within 30-50 feet of the router. It will help you to avoid signal drops.
- Restart your router to clear any temporary network glitches.
2. Power Cycle Your Camera
A simple restart can often resolve minor software glitches that cause the camera to malfunction.
- To kick-start the process turn off the camera > unplug it > and wait for 10 seconds.
- In the next step, plug it back in and turn it on. It will be helpful to you to refresh its system.
3. Update the Camera Firmware
Just like routers, Eufy cameras require regular updates to stay optimized. An outdated camera firmware version could be the culprit behind Error Code 110.
- First of all, open the Eufy Security app.
- Now, navigate to Device Settings > General > Firmware Update.
- Later on, install any available updates so that you can ensure that your camera is running the latest version.
4. Reduce Network Congestion
- In the very first step, disconnect unused devices from your Wi-Fi network. It will be helpful to you to free up bandwidth.
- Now, upgrade to a higher-speed internet plan if it is necessary.
5. Reconnect the Camera to Wi-Fi
If your camera has been moved to a new location or is trying to connect to the wrong network, you might need to reconfigure its settings.
- Firstly, remove the camera from the Eufy app.
- Next, perform a fresh setup.
- Thereafter, follow the on-screen instructions. It will allow you to re-add the device to your network.
6. Eliminate Wi-Fi Interference
It will be worth moving your camera and router away from potential sources of interference. These interruptions can include –
- Microwaves
- Cordless phones
- Other wireless devices operate on the same 2.4 GHz band.
- If it is possible for you, connect your Eufy camera to a GHz network for better performance.
7. Reset the Camera
If none of the previous solutions work, it might be time for a complete reset. This will erase all your camera settings, but it can resolve persistent issues.
- At the beginning of the reset procedure, press and hold the “Reset button” on the camera. You need to do it for 10-15 seconds until the LED blinks.
- After that, reconfigure the camera through the Eufy app after completing the reset procedure.
8. Verify Time and Date Settings
Initially, you need to confirm that the time and date on your Eufy Security app are synced correctly.
Afterward, adjust your device settings if they are not correct. Because mismatched time zones can be responsible for disruption in the smooth connectivity.
9. Reinstall the Eufy Security App
Now, is the right time to uninstall the app and reinstall it. This way, you can eliminate all potential software glitches. Thereafter, clear the app cache or data from your phone settings before going to reinstall it.
10. Contact Eufy Support
If the issue still persists, you can get in touch with the team members of Eufy customer support for more help.
Next, it will be better for you to offer all key details about the error.
It may include – the timing of the occurrence of this error. Apart from that, you can also let them know about all the troubleshooting steps that you have already taken.
Conclusion
Eufy Camera Error Code 110 can be frustrating, but it’s usually easy to fix. By following the steps above, you should be able to troubleshoot the issue and get your camera back online. Remember to start with basic fixes like checking your Wi-Fi signal and rebooting your router, and if needed, move on to more advanced solutions like updating firmware or resetting the camera.
If you’ve tried all the steps and are still facing issues, it may be worth reaching out to Eufy’s customer support for further assistance.
With these solutions, you can enjoy peace of mind knowing your Eufy camera will keep an eye on things as it should.
