Smart Devices

How to Reset Eufy RoboVac | Step-by-Step Ultimate Guide

In the modern era, Eufy Robovac is a famous robotic vacuum cleaner. It is known for its high-end efficiency and convenience as well. However, like other smart devices, it may also encounter several issues. There is a high need for resetting your device.

Is your Robovac unresponsive? Or is it encountering several connectivity issues? Are you also dealing with performance issues with your Eufy Robovac? If yes, Eufy Robovac reset is the one-stop solution for you. This way, you will be able to resolve the problem more conveniently.

You are lucky to be here because this comprehensive guide will help you walk through the procedure of how to reset Eufy Robovac. Apart from that, you will also be aware of different reset methods, troubleshooting tips, and the benefits of performing a reset.

Let’s get started!

Why You Might Need to Reset Eufy Robovac

Before going ahead to have an overview of the steps for factory reset Eufy Robovac, you should know the factors responsible for it. It is important to understand the requirements for resetting your device. A few of the most common reasons include –

– Connectivity Issues

In some cases, Eufy Robovac is having issues while connecting to Wi-Fi or the EufyHome app. By resetting it you can easily re-establish the connection.

– Unresponsive Behavior

Your Robovac may stop responding to commands. It may also fail to start cleaning properly.

– Software Glitches

Like other smart devices, Eufy Robovac can also experience minor software bugs. It can surely affect its performance.

– Navigation Problems

Is your Eufy vacuum struggling with navigation? Or is your device also bumping into objects repetitively? If so, you should reset your device. In addition to all these navigation issues, your device may also stop following cleaning patterns.

– Battery and Charging Issues

When your device does not charge properly or drains the battery too quickly, just a reset can help you resolve these issues.

– Before Selling or Gifting

If you are planning to give your Robovac to someone else, you should go ahead to perform a factory reset Eufy Robovac. But keep this thing in mind all stored data and settings will be erased this way.

Types of Eufy Robovac Reset

There are several types of resets that you can perform on your Robovac. It entirely depends on the issue that you are encountering with your Eufy device. The types are namely:

  • Soft Reset – It is a basic restart that assists you in resolving minor glitches.
  • Wi-Fi Reset – If your device is not connecting to Wi-Fi, this way by resetting its network settings you can enjoy connectivity.
  • Factory Reset Eufy Robovac – It is a full reset that restores the vacuum to its original settings. This erases all stored data.

How to Perform a Soft Reset on Eufy Robovac

A soft reset is the simplest way to fix minor issues. So, you should move ahead to follow these steps –

– Turn Off the Device

In the first step, locate the power switch on the bottom of your Robovac. After that, you need to turn it off.

– Remove the Battery (If Removable)

A few models allow users to remove the battery for a deeper reset. If your model has a removable battery, just take it out. After that, you can wait for a few minutes.

– Wait for 5 Minutes

Now, allow the device so that you can power down completely.

–Turn It Back On

In the last step, flip the power switch back to the ON position. Then, check if the issue is resolved.

It is damn sure that the reset method will help you to resolve temporary software glitches and performance hiccups.

How to Reset Eufy Robovac Wi-Fi Settings

If your Eufy Robovac is not connecting to the EufyHome app or Wi-Fi, by resetting the network settings you can surely resolve this issue. Let’s have an in-depth look at the steps for the reset procedure mentioned below –

– Ensure Robovac is Powered On

In the first step, you need to ensure that the device is on. You need to check it before performing the reset.

– Press and Hold the Reset Button

Now, locate the reset button. Usually, this button is near the power button or underneath the vacuum. You will surely be able to press this button. Thereafter, hold the reset button for around 10 seconds.

– Wait for the Wi-Fi Indicator Light

The Wi-Fi indicator will surely start flashing. It indicates that all the network settings have properly been reset.

– Reconnect to Wi-Fi

Last but not least, open the EufyHome app. Then you can go to settings. Later on, reconnect your device to Wi-Fi. It is too easy for you to do just by following the on-screen instructions that are visible to you on the screen.

How to Perform a Factory Reset Eufy Robovac

If your Robovoc is encountering major issues or you plan to give it away, performing a factory reset is the best option. Here are the steps that will let you know how you can perform Eufy Robovac reset –

– Turn Off the Robovac

In the first step, you have to utilize the power switch. It will enable you to shut down the device.

– Press and Hold the Auto Cleaning Button

This is usually located on the top of your device.

– Wait for a Beep Sound

Now, it’s time to hold the button for approximately 10-15 seconds. You have to do it until you hear a beep.

– Restart the Device

Finally, turn the Robovac back on. Later on, set it up with the proper utilization of the EufyHome app.

After performing a reset Eufy Robovac, all previous settings will definitely be erased. Then, you will be required to configure the device as if it were brand new.

Common Issues and Troubleshooting Tips

It is damn sure that even after resetting, a few issues may persist. Here is a list of a few additional troubleshooting tips. Let’s have an overview of these tips:

1. Robovac Not Turning On

  • First of all, ensure that the power switch is ON.
  • Now, check if the battery is fully charged.
  • After that, you need to remove and reinsert the battery if applicable.

2. Wi-Fi Still Not Connecting

  • Firstly, you have to make sure that our router is functioning properly.
  • In the next step, use a 2.4GHz Wi-Fi network. Because Robovac does not support 5GHz in some models.
  • Thereafter, move the router closer to the Robovac.

3. Poor Cleaning Performance

  • In the first step, empty the dustbin and clean the filter.
  • After that, check for tangled brushes or wheels.
  • Lastly, reset the device and recalibrate the navigation settings.

4. Robovac Not Charging Properly

  • Initially, ensure that the charging dock is plugged in and has power.
  • Next, clean the charging contacts on both the Robovac and dock.
  • After doing so, you need to try repositioning the device on the dock.

Wrapping-up

In short, now, you can easily know how to reset Eufy Robovac. It is the one and only way to realize the significance of troubleshooting several performance issues. By following the steps outlined in this guide, you can easily get your Robovac back in working condition.

Along with this, you can also minimize the requirement of resetting the device frequently. If you are continuously facing the issue, you can reach out to Eufy customer support. It may surely be the best step to eliminate the problem you are encountering.

Edward Curlin

Proud father to a Charming Princess 👑 | Fueled by Endless Cups of Coffee ☕ | Passionate about all things tech, gadgets, and the latest news 📱💻✨ | Wordsmith weaving tales of innovation and excitement 🖊️

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back to top button