A Netgear Access Point allows for wireless connections between a router and other devices. By extending the range of a wireless network, users can also access the Internet from farther away
Users can also restrict access to a network with its additional security features. Wireless connections are now secure, reliable, fast, and easy to install and configure.
It is also crucial to connecting to Netgear wireless access point properly so it works perfectly. Home and business owners can easily extend the range of wireless networks with this cost-effective method.
Multistory buildings and rural areas may not accommodate traditional wired networks. As a network grows, you can also scale to accommodate additional users and devices.
It is also imperative to understand how to connect to a Netgear wireless access point without any error. From the router, connect the Ethernet cable to the access point.
Connect your laptop or mobile device to the access point. There is a need to set up the access point using the web-based setup page.
Check the IP Subnet of the Existing LAN
There is a sticker on the back or bottom of your AP that shows its Netgear WiFi extender IP address. IP addresses for APs in different subnets from your LAN network need to be changed.
A check the IP subnet of the existing LAN is required. Follow the steps below.
- You can use the existing LAN to attach the computer and access the internet without any problems.
- There is a need to open a command window using the Windows command prompt. You click the Start button and type cmd into the Search programs and files box, depending on your Windows version.
- Use the command prompt to type ipconfig. You will find your subnet mask and default gateway in the resulting output.
There is also an option to check the IP subnet of the existing LAN on the Mac devices.
Configure a Static IP Address on Your Computer
You can also configure a static IP address on your computer. Follow the steps below to do this.
- It is necessary to configure the Netgear Wireless Access Point with a temporary IP address in the same subnet as the default IP address of the AP.
- The adaptor settings can be changed by navigating to Start > Control Panel > Network and Internet > Network and Sharing Center.
- You can connect to a local area network by double-clicking it.
- Here you can click on properties.
- Check out Internet Protocol Version 4 (TCP/IPv4).
- You can set your computer’s IP address to 192.168.0.210 and the subnet mask to 255.255.255.0.
- The computer can be directly connected to the access point using an Ethernet cable.
- You will need to open a web browser. You can enter the IP address of your wireless access point (for example, 192.168.0.100) in the browser’s address bar.
The default username and password for the AP login screen appear after the page loads. You can use the username as admin and the password as password. After this, you can configure a static IP address on your computer.
Change the IP address of the Access Point
Netgear Wireless Access Point setup requires changing the IP address of the access point due to the different configuration interfaces between models.
To ensure the IP address is updated correctly, users can always follow the manual instructions. The IP address is within the router’s range.
Once the IP address is changed, users can access the web-based setup page for the Netgear Wireless Access Point. It is also helpful in connecting to Netgear wireless access points.
- Use Configuration > IP if you’re using the latest model.
- You can adjust IP settings on the old model by clicking on IP settings.
- When DHCP Client Enabled is selected, a DHCP server (usually the router) can provide the AP’s IP address.
- There is a need to click on Apply. You can also configure a DHCP reservation on the DHCP server to ensure that the AP always receives the same IP address. After connecting to your network, you can also access the AP’s interface easily.
You can use the below steps to manually set the static IP address of the AP.
- Use an IP address that is not in use and is not in the range of a DHCP server (scope).
- There is a subnet mask and IP address set for your network.
- The default gateway address can be left blank or filled in with your network’s default gateway address.
- It is necessary to select an IP address that is not currently in use. On the network, this IP address must be outside the range and scope of the DCHP server.
- You can easily set the IP address and subnet mask according to your network.
- You can also enter the default gateway address of your network if you wish to change the default gateway address.
- DNS server addresses can be left blank or filled in with your network DNS addresses. Usually, the primary DNS corresponds to the default gateway, while the secondary DNS is blank.
The Netgear Wireless Access Point must be connected to the existing network before it can be configured. Disconnecting the Ethernet cable allows you to connect your existing network to the AP.
Wrapping Up
You can easily complete the process of connecting to the Netgear Wireless Access Point with the above steps. You can also quickly start using the AP.
It is imperative to read and follow all the steps accordingly.
