Nowadays, Ring security cameras have become a household necessity. It provides you with safety and peace of mind. However, like any other smart device, these can also face issues.
One of the most common problems that you and other users have to encounter is Ring Camera Error Code P3-11. You may not even have an idea that this error can prevent your Ring camera from functioning properly. It disrupts its ability to offer high-end security surveillance.
Have you been suffering from Ring Camera Error P3-11 for a long time? If so, you need not be fretting. Because you are not alone who is facing this issue. This guide will walk through all the details that you need to know.
It involves – the factors responsible for this issue. In addition to this, you will also be aware of the most effective solutions to eliminate this error.
Now, you need not to let this glitch hold you back. Just calm down!! It’s the right time to get your device ready and let’s go into the solving mode to figure out this annoying issue.
What Is Ring Camera Error Code P3-11?
Usually, the issue Ring Camera Error Code P3-11 indicates an issue with the power supply of your camera and its firmware as well.
It is the reality that this error often prevents your camera from connecting to the Ring app or Wi-Fi network. This is why your device becomes unable to function properly.
— Most Common Symptoms of Ring Camera Error Code P3-11:
- The Ring camera is not responding
- Your camera is stuck in setup mode
- The surveillance system keeps disconnecting from the Wi-Fi
- Your device fails to turn on after a power cycle
Causes of Ring Camera Error P3-11
There are a multitude of factors that are responsible for the Ring Camera Error Code P3-11. So, without stretching this issue further, you need to pay attention to the key details given below.
After understanding the causes of this issue, you will surely be able to curb this error. Let’s get started by paying attention to the common reasons for this issue:
— Power Supply Issues
If your Ring camera is not obtaining sufficient power, it may not function appropriately. A few common power-related issues involve:
- A malfunctioning power adapter or cable
- Loose power connections
- Several power fluctuations or outages
— Wi-Fi Connectivity Problems
Due to the weak or unstable Wi-Fi connection, you have to encounter the issue Ring Camera Error P3-11. A few potential reasons for this issue include:
- Poor Wi-Fi signal strength
- Inappropriate Wi-Fi password during setup
- Blockage to the Wi-Fi connection due to router settings
— Firmware or Software Glitches
An obsolete or malfunctioning firmware can lead to Ring Camera Error P3-11. It happens if your device fails to upgrade properly. This may be stuck in an error loop.
— Hardware Malfunctions
In some cases, internal hardware issues such as – a defective camera module or overheating can trigger this error.
— Server-Side Issues
It is once in a blue moon that the issue may be on your end. If Ring servers encounter downtime or maintenance, your camera may not connect properly.
How to Fix Ring Camera Error Code P3-11?
Have you understood the causes of Ring Camera Error Code P3-11? If so, you need to go through the step-by-step fixes to troubleshoot this error. Let’s have an all-seeing eye on the key resolutions to this error:
1. Check the Power Supply
It is true that power issues are a common reason for this error. So, you need to start by inspecting the power source.
- In the first step, ensure that the power adapter is plugged in securely.
- Now, try to use a different power outlet.
- In the next step, use a battery-powered Ring camera so that it will be easy for you to ensure that the battery is fully charged.
- After that, replace the power adapter if it’s faulty
2. Restart Your Ring Camera
By restarting your device, you can often fix minor glitches.
- First of all, unplug the camera from the power source.
- In this step, wait for 30 seconds.
- Last but not least, plug it back in. Then, cross-check if the error still persists.
3. Check Your Wi-Fi Connection
If your camera is striving for connectivity, you need to confirm that your Wi-Fi is stable.
- Initially, move your camera closer to the router.
- Next, restart your router and modem.
- Thereafter, ensure that you’re connected to a 2.4 GHz network. This is because there are many Ring devices that don’t support 5 GHz.
- Finally, it’s time to double-check that the Wi-Fi password entered in the Ring app.
4. Reset Your Ring Camera
If the above-given troubleshooting steps don’t work, it is damn sure that resetting your camera can be helpful to fix Ring Camera Error P3-11.
- At the beginning of the resetting procedure, you need to locate the reset button. Usually, this button is at the back of the camera.
- Now, press and hold the button for 15–20 seconds.
- After that, it is required to wait for the camera. It will be helpful to you to restart and go into setup mode.
- In the last step, it’s time to reconfigure the camera with the help of the Ring app.
5. Update the Ring Camera Firmware
Undoubtedly, outdated firmware can cause Ring Camera Error Code P3-11.
To check for updates the steps that you need to follow are:
- Firstly, open the Ring app.
- In the next step, select your camera from the list of devices.
- After that, go to Device Health.
- Thereafter, check for firmware updates. Then, you can go ahead to install it if it is available.
6. Reinstall the Ring App
If the Ring app itself is corrupted, you need to try to reinstall it.
- To kick-start the process of reinstalling the Ring app, you have to uninstall it from your smartphone.
- Now, restart your phone.
- Then, download and reinstall the app from the App Store (iOS) or Play Store (Android).
- Last but not least, log in and set up your camera again.
7. Check for Ring Server Issues
In some cases, the issue is not with your camera. Actually, the issue is with Ring’s servers. If you want to verify Ring’s server status, the steps to follow are:
- In the first step, visit Ring’s official status page – status.ring.com.
- If there’s any kind of outage, you have to wait until services are restored.
8. Contact Ring Support
Does none of the above solutions work? If so, your camera may have a hardware issue. So, you have to get in touch with the Ring customer support team for more help. It is too simple and easy for you to access them via:
- Start doing live Chat on the Ring website.
- Phone Support (Available 24/7)
- Community Forums for reliable troubleshooting tips
Wrapping Up
If you have been encountering the Ring Camera Error Code P3-11, this guide will provide you with all the essential steps. With the help of these tips or troubleshooting solutions, you can surely get your Ring camera back up and also running smoothly.
By maintaining this device properly and staying up-to-date with the latest software updates, you can definitely minimize the chances of facing the issue in the coming time.