Undoubtedly, Roku devices are recognized for their ease of use. Apart from this, this device has a multitude of streaming options. Sometimes, the process of syncing a remote without using a pairing button can be quite confusing.
A few of the Roku remotes have pairing buttons, but on the other hand, a few do not.
Don’t you have a pairing button on your Roku remote? Well, how challenging it is for you!
Worry not!
You are the luckiest guy to be here. Because, in this blog post, you will come to know about how you can get your remote connected and fully functional.
All you need to do for this is follow the detailed step-by-step process given in this post. This way, you will come to know how to sync Roku remote without a pairing button. Along with this, you can ensure a smooth setup experience.
Let’s dig a little deeper into this comprehensive guide to learn the detailed steps required to sync your Roku remote without using a pairing button.
An Overview Of Types of Roku Remotes
Are you going to take a deep dive into the syncing process for your Roku remote? If so, it is needed to get the meaning of the types of Roku remotes.
So, what are you waiting for? Let’s take a deep dive into this section and become familiar with the types of Roku remotes that you have :-
— IR Remotes
These remotes utilize infrared light. It enables them to communicate with the Roku device. They must have a direct line of sight to the device. On the other hand, they don’t have a pairing button.
— Enhanced Remotes
Enhanced remotes are one of the remotes that use Wi-Fi or Bluetooth. Usually, they have a pairing button. In case, your enhanced remote lacks a pairing button, then you can sync it with the use of alternate methods.
Step-By-Step Process To Sync Roku Remote Without Pairing Button
Here in this section, we have outlined the key methods to enable you to sync the Roku remote without using a pairing button. Let’s move ahead and walk through the steps involved in these methods.
So, without wasting even a single minute, you should proceed to have a glance at the instructions helpful in pairing your Roku remote in the absence of a pairing button.
Let’s get started!
Method 1: Syncing an IR Remote
Step 1: Ensure Compatibility
In the first step, you need to confirm that your Roku device is completely compatible with an IP remote. It can not be denied that most Roku players and Roku TVs are compatible.
But, it will be best for you to cross-check the particular documentation of the specific model. Apart from that, you can also prefer to verify the Roku website.
Step 2: Insert Batteries
Next, you can prefer to insert the fresh batteries into your IR remote. For this, it will be worth confirming that the batteries are properly oriented. It should be as per the polarity markings in the battery compartment.
Step 3: Power On Your Roku Device
Now, you can proceed to power on your Roku device. All you need to do for this is plug it into a power source and turn it on.
So, verify that your TV is set to the correct input, where your Roku device is connected.
Step 4: Point and Press
Last but not least, you can prefer to point the remote directly at the Roku device. In this procedure, you are required to press any button on the remote.
But it should be except for the power button on your remote. This will be helpful to you in identifying whether the Roku device is responding or not.
If it does, it means your remote is already synced and you can move ahead to make its optimum utilization.
Method 2: Using the Roku Mobile App
Suppose, your IR remote is not working. Or it may also be possible that you possess a different type of remote without a pairing button.
In such circumstances, you can prefer to use the Roku mobile app as an alternative mode. Let’s have an all-seeing eye into the process mentioned as follows :-
Step 1: Download the Roku Mobile App
Initially, you have to download the Roku mobile app from the App Store for iOS devices or Google Play Store for Android devices.
Step 2: Connect to the Same Network
Now, you need to make sure that your mobile device is already connected to the same WiFi network as your Roku device.
Step 3: Open the App and Select Your Device
This step is all about opening the Roku mobile app. Besides, you can also prefer to tap on “Devices” at the bottom of the screen. Next, the app will start searching for available Roku devices on the same network. After that, you can proceed to choose your Roku device from the list.
Step 4: Use the Mobile Remote
Are you done with the process of connecting your device to the app? Well, the app will initiate displaying a remote interface on your mobile device. You can prefer to use this virtual remote for navigating your Roku device.
Step 5: Pair a New Remote
Finally, you can navigate to “Settings” > “Remotes & Devices” > “Pair New Device” on your Roku device. For this, you can prefer to use the mobile app remote.
Along with this, you are required to follow the on-screen instructions so that you can easily pair your remote.
Method 3: Using HDMI-CEC
You might be surprised to know about the HDMI-CEC Consumer Electronics Control. Simply put, it is a feature that allows devices that have already been connected via HDMI to control each other. If your TV is supportive of HDMI-CEC, you can utilize your TV remote to control your Roku device.
Step 1: Enable HDMI-CEC on Your TV
It will be best for you to refer to the user manual of your TV so that you can easily enable HDMI-CEC. There is a possibility that this feature may be labeled differently as per the brand of your TV. For instance – Anynet+ for Samsung, Bravia Sync for Sony, and Simplink for LG.
Step 2: Connect Your Roku Device
In this step, you will have to connect your Roku device to your TV with the use of an HDMI cable. Furthermore, you are required to ensure that the Roku device is powered on.
Step 3: Use Your TV Remote
Once HDMI-CEC is enabled, you can proceed to use your TV remote so that you can easily control your Roku device.
Later on, you have to navigate to “Settings” > “System” > “Control Other Devices (CEC)” on your Roku device. This way, you can definitely ensure that CEC is enabled.
Troubleshooting and Additional Tips
To lower your stress level, we have outlined this section for you. Here, we have mentioned the key troubleshooting tips so that you can get rid of all the issues that occurred during the syncing procedure.
Why are you beating about the bush? Let’s come to the main point and explore the troubleshooting tips given below :-
— Ensure Firmware is Updated
Initially, you need to make sure that both your Roku device as well as your remote control are running the latest firmware.
For this, you can prefer to navigate to “Settings” > “System” > “System Update” on your Roku device. This will enable you to verify for the latest updates.
— Check for Interference
In the next step, you need to confirm that there is not any electronic device nearby. It will be beneficial for you to prevent your device from being affected by the unnecessary interference of the remote signal.
These devices are – microwaves, cordless phones, and other wireless devices. Such devices can interfere with remote signals.
— Use the Correct Input
You can also confirm that your TV is set to the correct input where your Roku device is connected. Sometimes, it may happen that the issue is as straightforward as the TV being on the incorrect input.
— Reset the Remote
Is none of the troubleshooting tips working for you? Or are you still having trouble? In such circumstances, you have the requirement to reset the remote.
To do this, you will have to remove the batteries. Next, wait for about 10 seconds. Later on, you can reinsert the batteries.
— Contact Roku Support
If you find yourself unable to resolve the issue even after performing the reset on your Roku remote, it will be worth ringing up the Roku customer support team members. The entire team members will provide you with more guidelines.
Additionally, you will be aware of the most helpful troubleshooting steps. It will be helpful to you to determine if there is an issue with the remote or Roku device as well.
Bottom-line
To be precise, Sync Roku remote without pairing button can be one of the most challenging tasks at first. But, when you follow these detailed steps on how to sync Roku remote without pairing button, you can surely get your remote working in no time.
So, no matter that you are using a pairing button, you will surely get your remote working in no time. After going through the details given above, you will be aware of the several ways to confirm that both your remote & Roku devices are properly connected.
For this, you can also prefer to use the Roku mobile app or HDMI-CEC, regardless of whether you are using an IR remote. Hopefully, by understanding the type of remote that you have, you can enjoy seamless streaming on your Roku device.
You can achieve this without any kind of interruptions. For this, it is a must for you to have a piece of proper knowledge about which one is the best method to sync it. In case, you have to encounter any issues, here are the noteworthy troubleshooting tips for you to resolve them quickly.
For any kind of persistent issues, you need not hesitate to approach Official Roku support for professional assistance.
