Are you unable to find out, and wondering how to reset Arlo camera? If your answer to this question is yes, then there is no need to get upset. Well, we have got you covered, here you will get a step-by-step guide.
Arlo is a smart home surveillance security camera that allows you to monitor your entire home. It also provides you with many software updates and lets you interact with the visitor, just by using your phone or other compatible device.
However, it does not matter how great a product is, it often needs care or maintenance by the users to work properly. This can be resetting, cleaning, and fixing the issues in the device when needed.
Thus, in case your Arlo camera is not recording well, and causing numerous issues, then the most simple and easy step you can do is factory reset the camera.
Factory resetting does not require too much workaround. Doing this is more straightforward than you think. Sometimes, the resetting process might be different, depending on the model you have.
But there are many users who are not aware of how to reset Arlo camera. If you are also one of those, then no need to get upset. The following guide will assist you with the same.
The good thing about the Arlo camera systems is that to reset them, all you need is access to the SmartHub base station. The process of factory reset might take a little time to perform.
Well, before you proceed further, it is necessary to get familiar with your device. You should know where the reset button on the camera is located, and the LED light indicator.
What does Factory Reset Mean?
Factory resetting means, restoring the software of an electronic device to its original state, by erasing all the data and settings, made by you or previously stored on the device.
It is like reverting the device to the same state, it was when you bought it. After factory resetting, it will act as if it is a new one.
While doing this, keep one thing in mind: the below instructions will work for most of the devices in the same way. But it can be different for some of the Arlo devices.
Methods for How to Reset Arlo Camera
Resetting the Arlo camera is not a complicated task, it is more straightforward than you think. Below you will get effortless and straightforward steps to factory reset Arlo camera and other devices.
There are two ways to factory reset Arlo camera. The first is via the sync button on the camera, and the second is via the Arlo account. Simply go through the following steps.
Steps to Reset Arlo Camera Via the Sync Button
You should reset the camera, by using the sync button, if your camera is running out of battery or offline and is unable to connect to the internet.
To start this first, you have to remove the camera from its place, to access the sync button. Then press and hold the button for at least 15-20 seconds.
After this, the LED light starts blinking blue, now wait till the process is completed. In some cameras, the LED light might blink amber, indicating that the reset process has started.
It might take 15 to 45 seconds to reset completely. Once the process is finished, you must have to add the device back to your account.
Steps to Reset Arlo Camera Via Arlo Account
If you don’t want to reset the camera via the sync button, then you can also do the same through the Arlo account. For this, ensure that the camera is connected to a cloud.
So, to do the same, launch the Arlo app, and sign in to your account. After this, visit “Settings” and below the “My Devices” section, choose the camera that you want to reset.
Once found, simply click on “Remove Device” and confirm the prompt, that you want to remove it from your account entirely.
How to Add the Camera to the Arlo Account?
After factory resetting the camera, now you have to add your security camera back to your Arlo app. To do this, first, ensure that you have downloaded the Arlo app on your device.
Once it gets downloaded, launch the app and log in to your account. After this, visit “Settings” and on the devices page, click on “Add New Device.”
Then choose the model of your camera, and follow the on-screen instructions to reconnect the camera to the network. And other Arlo devices like Smart Hub as well.
Methods to Factory Reset the Arlo Chime/ Chime 2
If you have Arlo Chime or Chime 2, then you need to ensure that it is connected to the outlet during the reset process, so that it can work properly.
So, to do this, turn on the Arlo device, and make sure it is connected to the power outlet. Then press and hold the Sync button, until the LED light starts flashing.
After this, release the button and wait till the device is reset. Now after resetting, you have to add the camera back. For this, open the app, and visit Settings.
Before you add the camera back, you first need to remove the device. Now to add it back, click on “Add New Device”, below the “Doorbell & Chimes.”
Then choose “Chimes” and go through the on-screen instructions to add the Arlo Chime Camera back into the app.
How to Reset the Arlo Essential Indoor Camera?
You can easily factory reset the Arlo Essential Camera, by using the Arlo App. Ensure that the camera is online, and powered on as well, while doing this. Follow the below instructions to reset the Arlo Essential camera.
- Press and hold the “Sync” button, for at least 15-20 seconds.
- Also, ensure the “LED is flashing blue” while pressing the sync button.
- It is not activated, if the camera still appears on the app.
- Then to re-add the camera to the app, open the Arlo app.
- After this, on the “Device” page, click on “Settings.”
- Now scroll down to the bottom, and click on “Remove Device.”
- Next, choose “Add New Device” and then your camera.
- After choosing, follow the instructions to connect the camera to the WiFi.
How to Reset the Arlo Base Station or SmartHub?
After resetting the camera, you should also reset the Base Station or SmartHub. Here is how to reset the Base Station or SmartHub.
- Press and hold the reset button, located on the back side of the base station with the help of a paperclip or a pin.
- After 15 seconds, release the button. Now after rest, the LED light on it will start flashing amber.
- After this, remove your SmartHub or base station, from the account to prevent further problems.
- Now launch the Arlo app or log in at Arlo.com, then go the Settings, and click on My Device.
- Then choose and click on the device you want to remove. Now you have to re-add or set up the device again.
Steps to Re-add and Set Up the Arlo Base Station or SmartHub
Once you reset the Arlo Base Station or SmartHub successfully, it is time to re-add and set up it. Below are the steps to re-add and set up the same.
- Open the Arlo app, or log in to Arlo.com.
- Then on the Device page, click on Add New Device.
- After this, choose Base Station or SmartHub.
- Now follow the on-screen prompts to reconnect the Base Station or SmartHub to your account.
Sum up
Hopefully, the above simple and easy step-by-step guide will help you with How to reset Arlo camera. Resetting your Arlo camera is a useful skill when troubleshooting issues or preparing to transfer ownership. It allows you to start fresh with default settings, potentially resolving any problems you might have encountered.
Remember to consult your specific camera model’s user manual for precise instructions, and make sure to back up your settings if needed. If you encounter any difficulties during reset Arlo camera process, don’t hesitate to contact Arlo’s customer support for assistance.
With the knowledge of how to reset Arlo camera, you can ensure that your home security system continues to operate smoothly.
