The easy troubleshooting procedure of Canon printers makes them a popular and preferred choice for so many individuals, businesses, and other entities all around the world.
Different errors tend to pop up sometimes on Canon printers with the b200 being the most common one.
In this piece, we have put together a list of tips that will help you to fix Canon printer error b200 easily. The b200 error is one of the most problems that occur within Canon printers.
While you must have come across some generic pieces of advice like turning the printer on and off to see if the error goes away. We will discuss more effective methods in this article that include taking care of the printer heads.
The Canon printer error b200 has been known to appear on various models including the mp560, mx922, mg6320, mp620, mx870, mg522, and others. Check out the following tips that will help you take care of the problem with your printer.
However, keep in mind that opening up your printer and taking out any of the parts is likely to render your printer warranty invalid. So, it might be a good idea to first get in touch with Canon’s customer helpline section and get some clarity over this matter.
Check out Some Method to Fix Canon Printer Error b200
Method 1
In a somewhat similar fashion to how most Canon error codes ask the user to “remove the power cable and get in touch with the service center,” this method will ask you to turn the printer off, unplug it, move the printer head in the middle, and then switch it on again.
Once the printer is back on, close it before the head goes to the right and then to the extreme left. Wait for it to restart again and see if the error has gone away.
Method 2
Another simple way to get rid of the Canon printer error b200 is to take out the empty ink cartridges and replace them with new ones while giving the printer head a thorough clean.
The catch in this one is that doing so will most probably nullify your warranty. So, better get in touch with Canon’s customer helpline before putting on your surgical hat to fix the printer.
Method 3
It is quite possible that the error on your printer is due to a problem with the printer head inside the inkjet printer.
While official advice from Canon customer services says that this error is often the result of an obstruction or something inside the printer that is not allowing the cradle to move, it doesn’t quite work that way.
The usual course of action for most users in this scenario will be to unplug the printer for a few minutes, remove any and all obstructions, and then power up the printer again.
This should take care of the problem. However, if this method doesn’t bring the desired results, we recommend that you take a closer look at the electrical error inside the printer head.
A major factor in this regard is the number of cartridges that your printer will be carrying.
If you happen to have a 5-ink cartridge printer, then applying this method to fix the error will be somewhat complicated because the printer head is located inside the printer on such models.
Follow to Steps to fix canon printer error b200
- Turn off power to the printer.
- Open the printer head section as if you are about to replace the inks.
- Turn on the power.
- Wait until the cartridge begins to move to the left. When it does, let it move more than halfway across.
- Once the cartridge is halfway across and heading to the left side, put the cover back on and leave the printer plugged in. This should fix the problem.
Our approach in this piece was to bring you a few simple tips that you can use and fix your printer on your own. As always, we recommend keeping in touch with Canon’s helpline before attempting these fixes yourself so that there are no problems with your warranty.
